- Model: IP-50
- Units in Stock: 9
|
$585.00
Functions:
- Automatic infusion
- KVO (Keep Vein Open)
It will give audible and visible alarm and then switch to KVO mode after finish infusing the preset volume
- Audible and visible alarm
The pump has OCCLUSION, AIR IN LINE, DOOR OPEN, FINISH, LOW BATT, INTERRUPTION, ABNORMAL and DELAY OPERATION alarm functions
- AC/DC
When the pump stops, purge function is ended to purge air out of line. Double click bolus button to purge. Contrarily, it infuses fast
- Flow rate setting
Set the flow rate between: Drop/min, ml/h and time infusion volume
- Self-check after startup
When power on, the pump executes a self-check. LCD display and all lamps will be lighten if it works normally. The corresponding lamp will be off if any part doesn't work
- Accumulated volume display and clear
- Memory function
Memory can keep the parameters which you set up last time over 8 years
- Flow rate calibration
In order to make infusion accurate, calibrate the infusion set according to actual situation
Specifications:
Flow Rate |
1ml/h~1300ml/h More than 1000ml/h, 1ml/h step Less than 1000ml/h, 0.1ml/h step |
Standard IV SET |
±5% |
Preset infusion volume |
1ml~9999ml More than 1000ml, 1ml step Less than 1000ml, 0.1ml step |
Occlusion sensitivity |
Optional choose from higher to lower |
KVO rate |
1~5ml/h (adjustable) |
Power supply |
110~220+10%, 50~60Hz+1Hz |
Power consumption |
Less than 20VA |
Battery Life |
More than 3 hours continuously at 30ml/h with fully charged battery |
Work Condition |
Circumstance Temperature: 10 ~40deg C
infusion precision will decrease when temperature ≤18deg C
Relative Humidity: 30~93%
Atmospheric Pressure: 86~106KPa |
Pump dimension (mm) |
233x146x269 |
Pump weight |
About 3kg |
Applicable scope |
Fit for mainline, small volume infusion, quick infusion |
|
|
|